FAQFAQ   SearchSearch   UsergroupsUsergroups 
 ProfileProfile       

Error converting DDP Image to CD
Goto page 1, 2  Next
 
Post new topic   Reply to topic    GEAR Software - CD / DVD Burning Software Forum Index -> GEAR PRO Mastering Edition Support
View previous topic :: View next topic  
Author Message
sleg



Joined: 03 Oct 2008
Posts: 5

PostPosted: Fri Oct 03, 2008 11:13 am    Post subject: Error converting DDP Image to CD Reply with quote

I have here a DDPid file v1.0 made on a sadie workstation. This DDP image refers to a image.DAT file. Gear pro is able to read those files but then this error occurs:

ERROR: Track 12 error (image file c:\mcd1\IMAGE.DAT, Offset 693202608 bytes, track size 79688112 bytes):
;Track size and image offset do not match with actual file length (772537920 bytes).
;Log file closed at 2008 10 03 12:11

Any idea of a solution?

Best Regards
Back to top
View user's profile Send private message
Michael Szabo
Site Admin


Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL

PostPosted: Mon Oct 06, 2008 1:48 pm    Post subject: Reply with quote

What are you trying to do with this DDP?
Back to top
View user's profile Send private message Visit poster's website
sleg



Joined: 03 Oct 2008
Posts: 5

PostPosted: Mon Oct 06, 2008 7:51 pm    Post subject: Reply with quote

im trying to burn a CD, from the ddp image file....

Any solution?

Regards
Back to top
View user's profile Send private message
Michael Szabo
Site Admin


Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL

PostPosted: Mon Oct 06, 2008 8:43 pm    Post subject: Reply with quote

'How' are you trying to burn the DDP?

Are you using the GEAR Command:
Code:
WRITECD -DDP <path_to_DDP_folder>


or...

Are you using File > Open Physical Image | Browse to IMAGE.DAT and select DA?

or...

...or...

?
Back to top
View user's profile Send private message Visit poster's website
sleg



Joined: 03 Oct 2008
Posts: 5

PostPosted: Mon Oct 06, 2008 8:50 pm    Post subject: Reply with quote

The first one...

am i doing it wrong?
Back to top
View user's profile Send private message
Michael Szabo
Site Admin


Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL

PostPosted: Mon Oct 06, 2008 9:19 pm    Post subject: Reply with quote

  693202608   - offset to track 12
+  79688112   - length of track 12
–––––––––––
  772890720

...and...

  772537920   - actual file length
- 772890720   - end of track 12
–––––––––––
-     352800

Now...

-352800 ÷ 2352 = -150

-150 / 75 (fps) = 2 seconds.

I suspect your IMAGE.DAT file is only the CD-DA, and the default 2 second pause is not included in the IMAGE.DAT file.

Can you send the DDPID & DDPMS files to support@gearsoftware.com?
Back to top
View user's profile Send private message Visit poster's website
sleg



Joined: 03 Oct 2008
Posts: 5

PostPosted: Mon Oct 06, 2008 9:27 pm    Post subject: Reply with quote

sure, but only tomorrow, cause i have that at my studio

Thanks for you help
Back to top
View user's profile Send private message
Michael Szabo
Site Admin


Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL

PostPosted: Tue Oct 07, 2008 6:14 pm    Post subject: Reply with quote

For anyone following this thread...

We received the DDPID and DDPMS files, and are looking into it...

...please stay tuned...
Back to top
View user's profile Send private message Visit poster's website
sleg



Joined: 03 Oct 2008
Posts: 5

PostPosted: Tue Oct 07, 2008 7:28 pm    Post subject: Reply with quote

Oki Thks
Back to top
View user's profile Send private message
Tboz



Joined: 14 Apr 2009
Posts: 1

PostPosted: Tue Apr 14, 2009 8:12 am    Post subject: Reply with quote

Hi!

What was the outcome of the analysis? I am asking since I have received a DDP file, generated from Sadie - and when trying it in the Trial version of Gear Pro Mastering Edition I get the exact same issue as the initial poster.
Back to top
View user's profile Send private message
Michael Szabo
Site Admin


Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL

PostPosted: Wed Apr 15, 2009 4:00 pm    Post subject: Reply with quote

Have you tried this with GEAR PRO Mastering Edition 8?

I believe the analysis was we were expecting the 2 sec pause to be including in the DDP image file, and I believe the image in question did not...

...and in the 7.03 release we weren't anticipating DDP images created by other software.
Back to top
View user's profile Send private message Visit poster's website
srs



Joined: 20 May 2009
Posts: 1

PostPosted: Wed May 20, 2009 5:20 pm    Post subject: Reply with quote

I'm using Gear Pro Mastering Edition 8 and receive the same error - the ddp folder was supplied by a mastering house and this image has been approved by the pressing plant (its an audio disc). But when I try and burn the image, the error received is:

..\image.dat, Offset 716849616 bytes, track size 48011376 bytes): Track size and image offset do not match with actual file length (764508192 bytes).

The MD5 checksum provided with the ddp folder also verifies the integrity of the data so no issue there.

Are there any settings that can be adjusted so that Gear Pro doesn't expect a 2 sec pause included in the ddp image file???
Back to top
View user's profile Send private message
Michael Szabo
Site Admin


Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL

PostPosted: Wed May 20, 2009 8:09 pm    Post subject: Reply with quote

As of this time, the GEAR PRO Mastering Edition 'gui' does not have any 'toggle' for not including the pre-gap for 'burning' DDP images.

For creating DDP images using GEAR, you can 'toggle' the pre-gap to be included, or not.

If possible, please send all of the DDP files: DDPID, DDPMS, PQDESC, SUBCODES.DAT and whatever other files (except the IMAGE.DAT, TRACK##.DAT, MAIN.DAT) etc. to support@gearsoftware.com and I will look at them to see if that is indeed the case.
Back to top
View user's profile Send private message Visit poster's website
cristiano



Joined: 22 May 2009
Posts: 2

PostPosted: Fri May 22, 2009 2:58 am    Post subject: hello Reply with quote

Hello friends.Nice to meet you.Have you tried this with GEAR PRO Mastering Edition 8?
________________________________
Back to top
View user's profile Send private message
smith69085



Joined: 10 Jan 2011
Posts: 1
Location: GB

PostPosted: Mon Jan 10, 2011 10:11 am    Post subject: Reply with quote

Did anyone ever find a way around this, I have the same problem on Gear pro 8.

Is there a command line to change how gear expects the pre-gap when burning DDP's. Would that solve it?
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    GEAR Software - CD / DVD Burning Software Forum Index -> GEAR PRO Mastering Edition Support All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Copyright © 2010 GEAR Software, Inc. All rights reserved. Privacy policy.