|
View previous topic :: View next topic |
| Author |
Message |
jani
Joined: 09 Jan 2007
Posts: 5
|
 Posted: Thu Jan 18, 2007 6:35 am Post subject: Fixating the Disc
|
 |
|
| Is it necessary to close (fixate) the disc to view the contents of the disc for every burn? |
|
| Back to top |
|
 |
Michael Szabo
Site Admin
Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL
|
| Posted: Thu Jan 18, 2007 8:58 pm Post subject:
|
|
|
What type of disc are you recording?
Multisession?
Variable Packet Writing?
Fixed Packet Writing? |
|
| Back to top |
|
|
jani
Joined: 09 Jan 2007
Posts: 5
|
| Posted: Fri Jan 19, 2007 4:42 am Post subject: In multisession disc
|
|
|
Thanks for the quick reply
I asked about multisession disc burnt using Track at once/Disc at once recording method . |
|
| Back to top |
|
|
Michael Szabo
Site Admin
Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL
|
| Posted: Fri Jan 19, 2007 4:45 pm Post subject:
|
|
|
Generally speaking, yes.
If you intend to read the disc on a machine other than the machine with GEAR installed, you should close the session.
On the recorder settings dialog (press F3) you will see the options for:
Recoring Method:
| Code: |
[Disc at once [↓]
[Raw Disc at once [↓]
[Track at once [↓]
|
and
| Code: | [√] Close Disc as multisession
[√] Fixate disc for use in CD-ROM |
You'll notice that the Fixate disc for use in CD-ROM checkbox is only available when using Track at once, because writing in Disc at once with [√] Close Disc as multisession will by spec close the session.
Unless you're writing Audio-CD tracks and intend to add more audio tracks, you should use Disc at once recording.
Note: Most set-top Audio-CD players cannot read multisession audio. Adding more audio tracks to a single session audio-CD would not be a multisession disc - but this should be done using Track at once recording.
If you do NOT use | Code: | | [√] Close Disc as multisession |
the session AND the disc will be closed and further recording is not possible |
|
| Back to top |
|
|
jani
Joined: 09 Jan 2007
Posts: 5
|
| Posted: Mon Jan 22, 2007 4:51 am Post subject: Raw disc at once
|
|
|
| Can u explain me about "Raw Disc at Once" Recording method |
|
| Back to top |
|
|
Michael Szabo
Site Admin
Joined: 11 Apr 2006
Posts: 522
Location: Jupiter, FL
|
| Posted: Mon Jan 22, 2007 1:18 pm Post subject:
|
|
|
Some recorders allow reading/writing of the CD sub-code channels.
If your recorder supports this function, you will be able to read/write the sub-code on the disc.
For example, karaoke CD+G discs have the on-screen graphics stored in the sub-code, and these discs should be written with RAW Disc-at-once.
NOTE: Not all CD recorders support RAW Disc-at-Once recording |
|
| Back to top |
|
|
|
FAQ
Search
Usergroups
Profile
