Files Created After Writing to Tape

From GEAR Software Knowledgebase

Revision as of 23:26, 13 May 2006 by Jcopp (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The following files are created after a project is written to tape:

  • tp_ident
  • tpresult
  • DDPID
  • DDPMS
  • PQDESCR

The tp_ident files contains the table of contents (TOC) of the project written to tape and some customer information. The DDPID, DDPMS, and PQDESCR files form the DDP information of the last project written to tape. You can write these files to tape by checking the corresponding boxes in the Common Tape Recorder Settings as previously described.

Personal tools
wiki navigation