Tape Commands

From GEAR Software Knowledgebase

Revision as of 20:08, 22 May 2006 by Jcopp (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

CDTODDPDIR -d [-s (sub_dir)] [-o] [-e]

Parameters: Existing directory where to create a folder with the DDP files and image files. Optional name (without path) of the DDP folder to create in the output dir. [-o] Force overwriting of the DDP and image files if they already exist. [-e] Do not create default sub folder if f_pszSubDir ( ) is empty. [-subc] Also copy the RW subcode from the source disc.

Description: This operation performs a conversion from a CD/DVD disc to a DDP image directory in the hard disk for mastering purposes.

CDTOTAPE [-d] [output_dir_spec]

Parameters: [-d] Use a direct 'on the fly' copy method copy operation Optional name of an existing output directory where the temporary track images will be stored,incase the direct method (-d) is not used. [-subc] Also copy the RW subcode from the source disc.

Description: This command performs a conversion from a CD/DVD disc to a premaster tape.

ERASETAPE

Description: Erases a tape completely.

EXITTAPE

Description: Closes the tape module.

GETTAPEPARMS

Description: Retrieves the current parameters of the Tape engine.

READTAPE [output_dir_spec]

Parameters: Name of an existing output directory where the files will be stored that will be read back from the tape (default is the Toolkit�s working directory).

Description: Reads a premaster tape and restores all the files to the hard disk.

SETTAPEPARMS [parameter] [value]

Parameters: Name of the parameter to set. New value to assign to the parameter.

Description: Sets the current parameters of the GEAR Tape/Mastering module.

TAPEUNITINFO

Description: Retrieves the vendor, product and firmware revision information and information about the capabilities of the currently selected tape unit.

UNLOADTAPE

Description: Unload (ejects) the tape.

VERIFYTP [volume_name]

VERIFYTP -ext

Parameters: Name of the GEAR volume to verify. Name of an external physical track image file ('type' = 1-11), or a track list file ('type' = 12). Type number indicating the type of the external image file.

Description: Verifies the specified source with a written premaster tape.

WRITEDDPDIR -d [-s (sub_dir)] [volume_name] [-o] [-e] WRITEDDPDIR -d [-s ] -ext [-o] [-e]

Parameters: Name of the GEAR volume to write. Name of an external physical track image file ('type' = 1-11), or a track list file ('type' = 12). Type number indicating the type of the external image file. Existing directory where to create a folder with the DDP files and image files. Optional name (without path) of the DDP folder to create in the output dir. [-o] Force overwriting of the DDP and image files if they already exist. [-e] Do not create default sub folder.

Description: Writes the specified source to a DDP image on the hard disk.

WRITETP [volume_name]

WRITETP -ext

Parameters: Name of the GEAR volume to write. Name of an external physical track image file ('type' = 1-11), or a track list file ('type' = 12). Type number indicating the type of the external image file.

Description: Writes the specified source to an ANSI labeled premaster tape.

Personal tools
wiki navigation