Writing a master tape

From GEAR Software Knowledgebase

Revision as of 23:25, 13 May 2006 by Jcopp (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

To write the project to tape:

If necessary open the project you want to test by selecting "existing GEAR project" and by clicking on the Open button GEAR project panel. Choose your Tape device from the pull-down menu in the Output Device panel. Click Write in the Output Device panel. When writing is complete, the tape is ejected automatically (if the eject checkbox is checked). Your tape is ready for delivery to the mastering plant! If you want GEAR to verify if the tape has been written correctly, you must enable Verify after Write in the Tape Settings (see See CD Settings).

Personal tools
wiki navigation